APPLICATION:
* AMR Automatic Meter Reading
* Wireless alarm and security systems
* Building automation, security, wireless monitoring and control of room equipment, Access Control System;
* Wireless data transmission, automatic data collection system;
* Low power telemetry
* 433 / 868 and 915 MHz ISM/SRD band systems
* Data radio can be used for Wireless conference voting system;
* Mapping;
* Radio modem can be used for Sports training & competition;
* Wireless dishes ordering;
* Wireless POS, PDA wireless smart terminal;
* RF modem can be used for Electronic bus station and intelligent traffic;
* RF transmitter Wireless electronic display screen and queuing machine;
* Wireless telemetry Charging for parking, parking lot;
* Wireless modem Automobile inspection and four-wheel orientation;
* Wireless sensor Industrial wireless remote control and air conditioning remote controller;
* Data communication used for railway, oil field, dock and army.
* LED display in thruway and public places
* Wireless RS232/RS485 conversion/connector;
* Point to multi-point wireless network, wireless on-the-spot bus and automatic data collection system;
Technical specification of HR-1030:
PERFORMANCE |
Power Output: | 5W or 10W (customized) |
RF Line-of-sight Range: | 8Km@9600bps, 12Km@1200bps |
RF Effective Rate: | 1200~19200bps optional |
Receiver Sensitivity: | -123dBm@1200bps, -118dBm@9600bps |
NETWORKING |
Networking Topology: | Point-to-point, point-to-multipoint |
POWER |
Supply Voltage: | 12V DC(customized according requirement) |
Transmitting Current: | <1.5A |
Receiving Current: | <30mA (TTL connect) |
Sleeping Current: | <1mA |
GENERAL |
Frequency Band: | 400MHz/420MHz/450MHz |
Communication Mode: | Half-duplex |
Channel: | 8(Default), 16/32(customized) |
Interface: | RS-232/RS-485/USB/TTL optional |
PHYSICAL PROPERTIES |
Size: | 85mm*58mm*16mm (without antenna port) |
Antenna Impedance: | 50Ω SMA (multiple antenna options available) |
Operating Temperature: | -35~+75 C(industry) |
Frequency Stability; | ±2.5ppm |
Interface definition:
Pin No. | Signal Name | Function | Level | Connection with terminal | Remarks |
1 | GND | Grounding of power supply | | Ground | |
2 | A(TXD) | A of RS-485(TxD of RS-232) | | | |
3 | B (RXD) | B of RS-485(RxD of RS-232) | | | |
4 | NC | | | | |
5 | DGND | Signal | | | |
6 | RXD/TTL | Received data input of the transceiver | | TTL | |
7 | TXD/TTL | Transmitted data out of the transceiver) | | TTL |
8 | SLEEP | Sleep control (input) | TTL | Sleep signal | low level sleep |
9 | TEST | Inside control(input) | | | |
Email: jetzhang.rf@gmail.com
TEL/WhatsAp/wechat: 18025358250
WEB: https://www.lora-module.com
|
|
10W, 25W power Radio Modem, Radio Power Module, Wireless RF Data Transceiver Module HR-1030 Images
|
